New Zealand arborists face a wide range of weather conditions, from subtropical heat in Northland to freezing temperatures in the Southern Alps. At Clogger, a New Zealand-based chainsaw protection equ
Do Chainsaw Chaps Work with Battery Chainsaws? (ASTM Standard Explained) (Post)Do chainsaw chaps work with battery-powered chainsaws? We can now say with certainty, yes. The latest version of the chainsaw leg protection standard, ASTM F1897-25, confirms that certified chainsaw
Why Not All Chainsaw Pants Are Equal: The Science of Protection in New Zealand(Post)If you have ever stood behind a running chainsaw, you know the feeling: that mix of focus and respect for a tool that can do serious damage in a split second. In New Zealand, forestry, farming, and ar
Top 10 Chainsaw Pants & Chaps Questions Answered(Post)Chainsaws are essential tools in New Zealand — whether you're clearing farmland in Taranaki, felling pines in Rotorua, or working on tree crews around Auckland. But along with that power comes serious
Chainsaw Chain Direction: Which Way Does It Go On?(Post)Short answer: Look down at the saw from the top: the cutting teeth on top of the bar should face forward, away from you. If the sharp edge of the teeth faces back towards you, the chain is on backward
Why Won't My Chainsaw Start? An Arborist's Checklist(Post)Short answer: Start with the obvious: is there fuel in it, and are you using the correct starting procedure for a cold or a hot saw? If the saw sat all winter with old petrol in it, it may need a trip
Chainsaw Chain Tension: How Tight Should It Be?(Post)Short answer: Pull up on the chain with gentle pressure: you should be able to see about three drive links (the bottom part of the chain). Too tight wears out the end of the bar. Too loose and the cha
Why Is My Chainsaw Smoking? 3 Causes From an Arborist(Post)Short answer: There are three likely causes. Too much two-stroke oil in your fuel. No oil in your fuel at all, which can destroy the saw. Or depth gauges (rakers) filed too low, so the saw keeps stall
Bar Oil Alternatives: Can You Use Motor Oil in a Chainsaw?(Post)Short answer: Phil's advice is to use the bar oil your saw's manufacturer specifies. The saw's oiler system is delicate and is made for oil of the right viscosity. Bar oil also has the right temperatu
Battery vs Petrol Chainsaw: A Working Arborist's Take(Post)Short answer: Both have their place. A battery saw is great for lots of small cuts up a tree, because you're not starting a chainsaw over and over. Bigger battery saws drain the battery quickly, so fo
Chainsaw Cutting Crooked? 3 Things to Check(Post)Short answer: Three things make a chainsaw cut crooked, pull to one side or cut at an angle. Uneven sharpening, where one side of the teeth has been filed more than the other ("cows and calves"). Dept
Chainsaw Depth Gauges (Rakers): Why a Sharp Chain Won't Cut(Post)Short answer: Most likely the depth gauges, also called rakers, are set too high. The depth gauge controls how deep each tooth bites, so if it's too high the teeth can't bite into the wood, however sh